888-778-4998 Call for service

Pre-sale renovation & post-purchase upgrades

Selling? List it ready.
Bought? Move in worry-free.

One crew for plumbing, heating & electrical. Pre-listing inspection repairs handled fast, post-purchase upgrades finished in a single visit — with 48-hour response.

Outdoor Daikin heat pump installed beside a home Outdoor heat pump installed beside a home Mitsubishi indoor mini-split unit installed near a ceiling Wall-mounted indoor heat pump unit Wall-mounted indoor heat pump unit in a finished room Slim outdoor heat pump installed beside a house Heat pump units installed on a commercial rooftop Outdoor heat pump installed on a flat rooftop
Heat + coolOne system, four seasons

A straightforward start

One call gets the conversation moving.

Describe the system, the issue, and what you want to improve. We’ll use that information to discuss the most appropriate next step for your home.

01
Tell us what you needShare the symptoms, equipment type, or upgrade you are considering.
02
Review the optionsDiscuss practical next steps based on your comfort goals and property.
03
Plan the workConfirm the scope and timing before moving ahead.

BC Rebate Guides

Information current as of October 2026 — programs, amounts, and deadlines change, so always confirm details on the official program websites. Many homeowners qualify for more than they expect; eligibility depends on your home and income level.

BC Hydro rebates

  • Whole-home heat pump: up to $4,000
  • Extra $1,000 bonus if completed and paid by Oct 31, 2026 — first come, first served
  • Heat pump water heater: about $1,000; insulation (attic, walls, basement): up to $5,500
  • Windows & doors: $1,000–$2,000; EV charger: up to $2,350 in select communities
  • Heat pump and insulation rebates require a government-registered (HPCN) contractor

Source: bchydro.com

Questions? Call 888-778-4998

CleanBC heat pump rebates

  • Income-based tiers: ductless single-head up to $5,500; ducted or multi-head up to $13,000
  • May stack with BC Hydro rebates for larger combined savings
  • Covers replacing gas, oil, or electric baseboard heat with a cold-climate heat pump
  • Installation must be done by a registered (HPCN) contractor to qualify

Source: betterhomesbc.ca

Questions? Call 888-778-4998

What counts as “low income”?

  • CleanBC uses income levels — not the tax-time poverty line
  • Based on household size plus combined pre-tax income of all adults (CRA Notice of Assessment, line 15000)
  • Family of 4 (July 2026 update): Level 1 under $94,900 → highest rebates; Level 2 under $118,600; Level 3 under $189,800 → still qualifies
  • You may qualify even if you are not “low income” at tax time — check before ruling yourself out

Source: betterhomesbc.ca

Questions? Call 888-778-4998

Let’s make your home more comfortable.

← All services

Furnace service

Steady heat, sized for your home.

A furnace should deliver even, dependable warmth without making every room feel like a compromise. We help homeowners plan replacements and heating upgrades around the house, existing ductwork, fuel source, comfort concerns, and long-term priorities.

What we look at

A replacement is more than a model number.

The right furnace depends on how the home actually behaves. Before a replacement is planned, the conversation should cover square footage, insulation, windows, duct condition, airflow, thermostat setup, and any rooms that are consistently too warm or too cold.

We can help review a straightforward furnace-for-furnace replacement or discuss whether a dual-fuel or heat-pump-based approach makes more sense for the property. The goal is a clear scope—not an oversized unit that cycles frequently or a rushed swap that leaves old comfort problems unresolved.

Replacement planningCapacity, venting, drainage, electrical needs, controls, and equipment access.
Comfort troubleshootingUneven temperatures, weak airflow, noise, short cycling, and thermostat concerns.
System coordinationReviewing how the furnace works with air conditioning, a heat pump, filtration, or zoning.
Clear next stepsA defined scope before equipment is ordered or installation timing is confirmed.

Why choose us

Practical advice before work begins.

  1. We start with the houseEquipment selection should reflect the building, ductwork, and the comfort issues you want solved.
  2. We explain the trade-offsEfficiency, staging, blower performance, noise, and future cooling plans all affect the best fit.
  3. We coordinate the full scopeMechanical, gas, drainage, controls, and electrical requirements are considered together.
  4. We keep the process clearYou can confirm the proposed equipment, included work, and timing before proceeding.

Common questions

Furnace FAQ

How do I know whether to repair or replace my furnace?

Age alone does not decide it. Consider the failure, repair cost, parts availability, operating history, comfort performance, and whether other parts of the system also need work. A proper assessment helps compare the immediate repair with the value of a planned replacement.

Does a higher efficiency rating always mean a better choice?

Efficiency matters, but fit and installation quality matter too. Venting changes, condensate drainage, duct limitations, and how the furnace operates at part load can all influence the practical choice for your home.

Can a furnace work with a heat pump?

Yes. In a dual-fuel arrangement, a heat pump can handle much of the heating and cooling while the furnace serves as backup under selected conditions. Compatibility, controls, electrical capacity, and the homeowner’s priorities must be reviewed.

What information should I have when I call?

If available, share the furnace model, approximate age, fuel type, thermostat type, recent service history, and the symptoms you have noticed. Photos of the equipment area can also help start the discussion.

Start with a clear furnace conversation.

← All services

Hot water tanks

Reliable hot water, without guesswork.

When a tank leaks, recovers slowly, or no longer meets household demand, the replacement needs to be planned quickly and carefully. We review capacity, energy source, venting, access, drainage, and the way your family uses hot water.

Service overview

A tank matched to demand and space.

A water heater replacement has to do more than fit through the door. Household size, simultaneous hot-water use, recovery rate, available fuel, venting route, floor drain, shutoffs, seismic restraint, and clearance around the equipment can all affect the plan.

We help compare like-for-like tank replacement with other practical options when the site allows. If the current tank is leaking, shut off the water supply if you can do so safely, protect the surrounding area, and call promptly. Electrical or gas isolation should only be handled when you know the correct procedure for the equipment.

Tank replacementReviewing volume, recovery needs, footprint, connections, and disposal of old equipment.
Fuel and venting reviewPlanning around gas, electric, power-vented, or other existing configurations.
Installation detailsDrainage, shutoffs, expansion considerations, clearances, and safe access.
Future planningDiscussing whether the home’s changing occupancy or renovation plans affect capacity.

Why choose us

A complete scope, not a rushed swap.

  1. We ask about real usageBedrooms and tank size are only a starting point; peak demand and recovery expectations matter.
  2. We inspect the installation areaAccess, venting, drainage, and connections can change the work required.
  3. We explain options plainlyYou can compare capacity, recovery, energy source, and space requirements without unnecessary jargon.
  4. We coordinate related workWhen electrical or mechanical changes are part of the scope, they can be planned together.

Common questions

Hot water tank FAQ

What are signs that a tank needs attention?

Water around the base, corrosion, rumbling sounds, inconsistent temperature, reduced hot-water duration, or water that takes longer to recover all deserve attention. A visible leak should be treated as urgent.

Should I replace my tank with the same size?

Not automatically. The existing capacity may have been too small, unnecessarily large, or based on a different household. Usage patterns, recovery rate, available energy source, and installation constraints should guide the decision.

Can I switch from a tank to tankless?

Sometimes, but it is not always a simple swap. Gas supply, venting, electrical power, water quality, flow expectations, and installation location all need to be checked before deciding.

What should I send before an appointment?

Photos of the full tank, model label, venting above it, nearby piping, floor area, and access path are useful. Also note whether you see active water and whether the home currently has hot water.

Need a clear hot-water replacement plan?

← All services

Boiler systems

Hydronic comfort, carefully considered.

Boilers serve a connected system of piping, pumps, controls, emitters, and sometimes domestic hot water. We help define boiler work by looking beyond the appliance and considering how the whole system is expected to perform.

Range of wall-mounted and floor-standing boiler equipment
Boiler equipment shown on the source service page.

System-first planning

Understand the loop before changing the boiler.

Hydronic systems can include baseboards, radiators, in-floor tubing, multiple zones, indirect tanks, mixing components, circulation pumps, and controls installed over many years. A useful assessment starts by identifying what is present and which symptoms occur in which zones.

For replacement planning, we consider heat demand, supply and return temperatures, venting, fuel connection, condensate handling, pumping strategy, domestic hot-water requirements, and available mechanical-room space. The aim is to avoid treating every comfort complaint as an appliance problem.

Boiler replacement planningEquipment fit, output, venting, controls, drainage, and connections.
Hydronic system reviewZones, pumps, valves, expansion components, emitters, and visible piping.
Combination systemsReviewing arrangements that also serve domestic hot water.
Comfort concernsCold zones, noise, pressure changes, slow response, and inconsistent temperatures.

Why choose us

We think in systems.

  1. We map the existing setupUnderstanding zones, pumps, piping, and controls helps define the actual problem.
  2. We separate symptoms from causesA cold room can come from controls, flow, air, balancing, or emitters—not only the boiler.
  3. We plan around the mechanical roomService access, venting routes, condensate, and future maintenance are part of the discussion.
  4. We document the proposed scopeThe equipment and related work can be reviewed before the project moves ahead.

Common questions

Boiler FAQ

Why is one heating zone colder than the others?

Possible causes include a thermostat or control issue, a closed or failed valve, air in the loop, circulation problems, balancing, or an emitter problem. The pattern and system layout help narrow the cause.

Is a combi boiler right for every home?

No. A combi system can save space, but domestic hot-water demand, heating load, incoming water temperature, simultaneous use, and the existing distribution system all affect whether it is a good match.

What information helps with a boiler inquiry?

Photos of the boiler, labels, nearby piping, pumps, venting, controls, and the full mechanical room are helpful. Note which zones are affected, any displayed error code, and whether domestic hot water is also involved.

Can an old boiler be replaced without changing the rest of the system?

Sometimes. However, the condition and compatibility of pumps, controls, venting, piping, and emitters should be reviewed. Replacement is a good time to identify components that would limit performance or serviceability.

Talk through your boiler system with us.

← All services

Heat pumps

One system for heating and cooling.

Modern heat pumps move heat instead of creating it directly. The result is efficient cooling in summer and useful heating through Metro Vancouver’s winter—provided the equipment, distribution, controls, and outdoor-unit location are planned properly.

Service overview

Designed around rooms, loads, and placement.

Heat pumps are available in ductless, multi-zone, central ducted, and dual-fuel configurations. The right approach depends on the home’s heat loss, existing ducts, electrical capacity, number of comfort zones, indoor-unit locations, and a suitable outdoor location with service access and drainage.

We discuss both heating and cooling expectations. That includes where indoor units will sit, how air will move between rooms, what happens during colder weather, how noise and appearance affect outdoor placement, and whether backup heat is part of the design.

Ductless systemsSingle- and multi-zone options for targeted comfort without adding full ductwork.
Ducted systemsWhole-home options that use suitable existing or newly planned air distribution.
Outdoor placementClearances, service access, sound, drainage, snow protection, and line routing.
Controls and backup heatPlanning how the heat pump works with thermostats and any secondary heat source.

Why choose us

Comfort details come first.

  1. We compare system typesDuctless, ducted, multi-zone, and dual-fuel solutions have different strengths and constraints.
  2. We plan visible detailsIndoor head locations, exterior line-set routes, and outdoor placement are discussed before installation.
  3. We coordinate electrical needsAvailable panel capacity, disconnects, circuits, and related scope are considered early.
  4. We talk about operationSetpoints, filtration, airflow, defrost, and backup heat are part of living comfortably with the system.

Common questions

Heat pump FAQ

Will a heat pump heat my home in winter?

Cold-climate equipment can provide useful heat at low outdoor temperatures, but performance depends on the selected model, sizing, home heat loss, and distribution. The design should also define if and when backup heat is expected to operate.

Do I need ducts?

No. Ductless indoor units can serve individual areas, while central systems use ducts. Some homes benefit from a mixed approach. Room layout and the number of zones help determine what is practical.

Where can the outdoor unit go?

The location needs manufacturer clearances, airflow, service access, drainage, and a suitable base or support. Sound, neighbour-facing areas, windows, walkways, and the line-set route also matter.

Can a heat pump replace my furnace?

In some homes it can; in others, a furnace remains as backup in a dual-fuel system. Duct suitability, electrical capacity, heating load, homeowner preferences, and equipment selection all influence the answer.

Plan the right heat-pump system for your home.

← All services

Electrical work

Power planned with the project.

Home-comfort upgrades and renovations often require new circuits, disconnects, controls, lighting, or panel work. Coordinating the electrical scope early helps prevent surprises after equipment and finishes have already been selected.

Service overview

Electrical scope that fits the larger job.

Electrical work should be defined around the actual load, the condition and capacity of the existing system, routing constraints, equipment requirements, and the finishes that need to be protected. This is especially important when adding a heat pump, electric water heating, kitchen equipment, new lighting, or power for a renovation.

We help homeowners organize the practical questions: where power is needed, what equipment is being supplied, whether the panel has space and capacity, how circuits can be routed, and whether permits or additional review are required. The exact scope is confirmed before work proceeds.

HVAC electricalCircuits, disconnects, controls, and coordinated power requirements for comfort equipment.
Renovation wiringPlanning receptacles, switches, lighting, and equipment connections around the new layout.
Panel considerationsReviewing available spaces, service capacity, labels, and the loads being added.
Safety and permitsIdentifying when the proposed work calls for permitting or licensed trade involvement.

Why choose us

Less rework through better coordination.

  1. We review the equipment firstVoltage, amperage, breaker, disconnect, and control requirements come from the actual installation.
  2. We consider routing and finishesWalls, ceilings, access, and repair requirements are discussed before pathways are chosen.
  3. We connect electrical and mechanical planningThe two scopes are aligned so one trade is not waiting on missing information from the other.
  4. We define what is includedYou can review the locations, equipment connections, and related finish work in advance.

Common questions

Electrical FAQ

Do heat pumps need a dedicated circuit?

Most systems have specific circuit and disconnect requirements set by the equipment manufacturer and applicable electrical rules. The indoor and outdoor components, auxiliary heat, and controls must all be considered.

Does adding equipment mean I need a panel upgrade?

Not always. A review of the existing service, panel, connected loads, available spaces, and new equipment requirements is needed before making that determination.

When should electrical planning happen in a renovation?

Early—after the layout and major equipment are known, but before walls are closed and finishes are ordered. Early planning allows useful outlet, switch, lighting, and equipment locations to be coordinated.

What should I provide for an initial discussion?

Share photos of the panel with the door open and labels visible, the proposed equipment location, the surrounding area, and any product specifications you already have. Do not remove the panel cover yourself.

Bring the electrical scope into the plan early.

← All services

Renovation packages

Focused improvements for the next chapter.

A home being prepared for sale needs a different plan from one just purchased. Our packages focus the scope: visible, practical updates before listing, or coordinated improvements that make a new home work better after possession.

Finished interior with a discreet wall-mounted heating and cooling unit
A finished interior from our real project portfolio.

Two clear packages

Work tied to a real property goal.

Pre-sale refreshes concentrate on the visible details that shape a buyer’s first impression: patching and paint, worn finishes, minor repairs, lighting updates, fixture replacement, and a practical list of issues worth addressing before photos, showings, or inspection.

Post-purchase improvements start with how you want to live in the home. The scope can coordinate comfort equipment, electrical changes, plumbing or handyman items, and selected interior updates before or after move-in.

Pre-sale walkthroughPrioritizing noticeable defects, unfinished details, and small repairs that distract buyers.
Surface refreshPatching, paint, trim, hardware, fixtures, lighting, and selected finish updates.
Post-purchase planningOrganizing must-do repairs, comfort upgrades, and room-by-room improvements.
Coordinated tradesBringing heating and cooling, electrical, plumbing, and handyman items into one scope.

Why choose us

Priorities before demolition.

  1. We start with the outcomeA listing deadline, move-in date, inspection item, or comfort goal shapes the work plan.
  2. We separate essentials from extrasThe scope can distinguish urgent repairs, high-impact improvements, and optional upgrades.
  3. We coordinate building systemsMechanical and electrical needs are considered alongside walls, finishes, and access.
  4. We confirm the boundariesIncluded work, exclusions, product choices, sequence, and timing are reviewed before the project starts.

Common questions

Renovation FAQ

What belongs in a pre-sale refresh?

Usually the most visible, distracting, or inspection-relevant items that can be completed within the timeline. Deep structural changes and highly personal upgrades rarely belong in a focused pre-sale scope.

Can you work from a home inspection report?

Yes. The report can help create a starting list, but each item still needs to be reviewed on site and assigned to the appropriate trade. Not every observation has the same urgency or scope.

Should I renovate before or after moving in?

Dusty or disruptive work is often easier before move-in, while decisions about storage and daily function can benefit from living in the home first. The plan can separate immediate work from a later phase.

How do we keep a small renovation from expanding?

Set a clear objective, written scope, allowances, exclusions, and decision deadline. Existing conditions can still create changes, but agreed boundaries make them easier to evaluate before proceeding.

Tell us what the property needs next.